Installing An Interior Door, One Of The Most Useful Handyman Services

Installing an interior door is not as hard as it seems, especially if you have a little experience in handyman services. If you don’t, but want to learn, you are in the right place: by reading this article, you will find out how to do it in just six easy steps. However, if you still don’t feel like you’re up to this task or your time is more precious, you could just hire a professional company that will do the job for you. We will recommend the best one at the end of this article.

But, until then, let’s see what are the steps of installing an interior door, one of the most useful handyman services:

  1. Buy a suitable door, that will fit the opening in the wall.

When choosing a new door, you have to make sure it will fit the opening in the wall. Usually, dimensions are standard, between 24 and 36 inches. The framed-in rough opening is normally around 2 inches wider than the purchased door, not including the jamb, which allows for adjustments to achieve a plumb level at the end of these handyman services;

  1. Straighten out the drywall.

The next step involves straightening the things out. Start by drawing a plumb line on the wall and measure .5 inches from the rough opening on the hinge side of the door. Using a 4′ or 6′ level, draw a line down the drywall. You can also use a laser level, which is easier and more accurate (there are even models that attach to the wall);

  1. Attach the installation brackets to the door.

The handyman services of mounting a door continue with the installation of 6 brackets to the outside of the jamb (the wood frame that encases the door), in pairs. The first two brackets should be 8 inches from the top, the next ones – just above the latch stop, and the final brackets – 8 inches from the bottom;

  1. Put the door in place.

Never place the door directly on an unfinished floor! If carpet or hardwood will be installed, place .5 inches blocks under the door. If laminate will be installed, place .25 inches blocks under the door;

  1. Attach the installation brackets to the wall.

The fifth step of these handyman services involves attaching the installation brackets to the wall. After the three pairs of brackets are screwed into the wall, using the same reference notch for all of them, the door will be level, and the blocks under it can be removed;

  1. Install the casing around the door.

Last but not least, you should install the casing, also known as the trim. If installed correctly, it will perfectly hide the door installation brackets. Depending on your preferences, you can opt for mitered corners or any other style. If you think you can’t handle this task, we recommend you to hire (Home & Business Services), which will take care of these handyman services with maximum attention and professionalism.